THE CLOCK

1. Hook up, plug in, connect to printer etc.

2. Turn on Machine

3. Flip Red Switch on Wall by Door.

4. Program:

��������� 1.Set up

��������� 2.Event Sequence(down)

��������� 3.User Defined(keypad)

��������� 4.View Edit(push 8 on keypad)

��������� 5.Number of Lengths (enter)

��������� 6.Gender(enter)

��������� 7.Age(enter)

��������� 8.Event(enter)

��������� 9.After Programming-Quit

��������� 10.Record Setup-Yes

��������� 11.Turn off-Turn back on

5. To send meet set-up directly to clock instead of programming:

1. From step 3 above User Defined 8 or 9

2. Delete

3. Get out of set-ups.

4. Go into Meet Manager

5. Timer

6. Download events

7. Choose User 8 or 9

8. Go back to Clock

9. User defined 8 or 9

10.Record Set-ups-Yes

6. Display Time of Day:

��������� 1.Scoreboard (enter)

��������� 2.Scbd Blank (enter)

��������� 3.Quit

7. During Races:

��������� 1.Scoreboard On

��������� 2.Delete Lanes Not Used

��������� 3.Combinations--Skip to Last Event

��������� 4.Store Print (after each race)

��������� 5.Reset

��������� 6.Yes on OK to Print (make sure printer on line)

��������� 7.Next Event or Next Heat

PROBLEMS:

Don't Hit Pad: -Plus Touch/Lane Number on numeric keypad/Enter-during race-or Finish Arm if on last lap. If pad does not turn off on finish turn, store print��� -say yes to warning box telling you lanes need to be checked.